Circuit Lab 360 Studio — PTC Creo Parametric CAD, Datum Planes, CS0 (0,0,0) Coordinates & Real SPICE

Datum Origin & Reference Planes

Placed Component Features (Ref: CS0 0,0,0)

Selected Feature Parametric Editor

Click any part above to inspect datasheet ratings or click + Place to insert at coordinates relative to CS0 (0,0,0).

🧬 First Arduino Genesis & Adaptation Loop (12 Stages)

Multi-Servo Power Rail Scaler

Parallel Servos: 1× Servo

1,000,000-Transistor VLSI Chip Synthesizer

Target Budget: 1,048,576 T

Loading... READY Peak Temp: 25.0°C Actuator: Ready Drag any part on the XY grid · Click any P1/P2/P3 pin circle to route a wire

Feature ID	Package	Centroid (X, Y, Z) mm from CS0(0,0,0)	Radial R & Angle ∠ from (0,0,0)	Envelope L×W×H (mm)	Pin Global Coordinates (X, Y, Z) mm	Electrical V / I / Tj

Inspect Organ:

              Click any component in the CAD viewport to probe continuity, voltage drop, and thermal dissipation.
            

Part	Type	Voltage	Current	Power	Junction Temp

Trace	Net	Width	Current	IPC Limit	Status

SPICE Netlist / KiCad .kicad_pcb (CS0 Referenced)

📈 Real ngspice .ac Bode Plot (Mag dB & Phase °)

🧠 C9 Verified 6-Variant Ablation Tutor (Zero Stray Numbers)